multi compartment cable trunking


  • All sizes and dimensions displayed in mm
  • Trunking is supplied in 3m lengths as standard unless HDG which is supplied in 2m lengths
size50 x 2550 x 5075 x 5075 x 75100 x 50100 x 75100 x 100150 x 50
2 compAGT21/2AGT22/2AGT32/2AGT33/2AGT42/2AGT43/2AGT44/2AGT62/2
3 compXXAGT32/3AGT33/3AGT42/3AGT43/3AGT44/3AGT62/3
4 compXXXXXXXAGT62/4
size150 X 75150 X 100150 X 150200 X 50200 X 100225 X 50225 X 75225 X 100
2 compAGT63/2AGT64/2AGT66/2AGT82/2AGT84/2AGT92/2AGT93/2AGT94/2
3 compAGT63/3AGT64/3AGT66/3AGT82/3AGT84/3AGT92/3AGT93/3AGT94/3
4 compAGT63/4AGT64/4AGT66/4AGT82/4AGT84/4AGT94/4AGT93/4AGT94/4
size225 X 150225 X 225300 X 50300 X 75300 X 100300 X 150300 X 225300 X 300
2 compAGT96/2AGT99/2AGT122/2AGT123/2AGT124/2AGT126/2AGT129/2AGT1212/2
3 compAGT96/3AGT99/3AGT122/3AGT123/3AGT124/3AGT126/3AGT129/3AGT1212/3
4 compAGT96/4AGT99/4AGT122/4AGT123/4AGT124/4AGT126/4AGT129/4AGT1212/4

Armorduct offer a comprehensive range of standard returned edge surface trunking single or multi compartment to British Standard BS EN 50085-2-1:2006 + A1: 2011 unless otherwise stated

Mild steel pre galvanised manufactured from steel complying with BS EN 10346: 2015 continuously hot-dip coated steel flat products

For Powder Coating – please provide RAL number

Size variations available – please contact us for more details

Gusset bends as standard, square/sharp bends, tees and intersections availableBoth the lid and the body are supplied in 3m lengths (unless HDG) complete with coupler and all necessary fixing screws. Lids are sold separately. Alternative lengths and extra compartments can be made to order

HDG is supplied in 2m lengths

All trunking accessories are also supplied with an integral coupler and all necessary fixing screws

As well as our standard turnbuckle we offer a screw fixing & tamperproof screws for security trunking

Handed top lid bends, tees and intersections
When asymmetric compartment spacings are specified, please provide the exact hand and location of the accessory. When this is not possible, which is often the case in practice, loose dividers can be supplied for
 on-site fitting

Flyovers are necessary to maintain segregation through top lid tees and intersections only.
 However, the introduction of the flyover always reduces the capacity of the system by half.
 This is a severe restriction and must always be taken into account when the system capacity
 is specified.
 Full capacity can be maintained through the junction by using tees and intersections with double

request a quote

Manufacturing the difference

Call the sales team on 01384 233 445