Surface
Cable Trunking
|
  |
| |
| Description |
| |
| |
| A Comprehensive range of single and multi-compartment returned edge surface cable trunking and accessories in stainless steel sheet.
The trunking is supplied in 3 metre lengths as standard, complete with body, lid, coupler and all necessary fixing screws.
The body of the trunking and accessories is constructed with a returned edge and the couplers are secured with M5 stainless steel screws. For trunking widths up to and including 100mm, the lid is fixed using centrally located captive stainless steel turnbuckles. For widths greater than 100mm, single turnbuckles are replaced by pairs for added security.
A full range of fabricated accessories with integrated couplers and screws complete the system.
The trunking is supplied with a removable plastic coating which protects the material for surface damage during manufacture and distribution. Accessories are polished after manufacture to eliminate welding marks and other surfacing marking caused by the fabrication process. To protect accessories from damage during transit or whilst held in stock, each accessory is individually packed.
|
|
| |
| Standard Specification |
| |
| British Standard |
No standard exists for stainless steel trunking, however, in terms of size and construction the range complies with the genral surface cable trunking specifcations BS 4678: Part 1: 1978 |
| Material Gauge |
Unless otherwise stated all products shown are manufactured from 1.2mm material. |
| Material Type |
Conduit Boxes rated at IP66. Ingress protection ratings are maintained only when all entries are adequately sealed. |
| Material Finish |
2A Bright Annealed (Mirror Finish). Mechanically polished finish 3B Dull buffed (Satin) |
|
| Alternative Specifications |
| Length |
Trunking can be supplied in lengths of 3 meters or shorter if required. |
| Material Gauge |
Gauges other than 1.2mm can be supplied. |
| Material Type |
Stainless steel sheet to BS1449: Part 2: 1983 Type 316L. 1.4404 |
| Material Finish |
Mill finish 2B (Smooth dull finish) |
|
| |
| Ordering Information |
| |
The following tables show the internal dimensions and order code for the standard range. In all cases,
the first digit refers to the width of the trunking and the second digit to the height of the side walls.
The table shows only the standard sizes, intermediate or larger sizes can be manufactured as required.
Please note
- Earth Links are not included and should always be ordered seperatetly
- All accessories have intergrated couplers.
- When ordering comparemented trunking an equal split is assumed, however upon
request unequal partitioning can be provided.
When ordering in 316L Material:
Add suffix /316 to standard catalogue number - for example SGT22/316
When ordering with a dull or satin finish:
Add suffix /2B or /3B to standard catalogue number - for example SGT44/2B
|
|
| Trunking |
|
|
|
|
| |
|
|
|
|
|
Size |
50x50 |
75x50 |
75x75 |
100x50 |
100x75 |
100x100 |
150x50 |
150x75 |
150x100 |
150x150 |
Compartment |
SGT22 |
SGT32 |
SGT33 |
SGT42 |
SGT43 |
SGT44 |
SGT62 |
SGT63 |
SGT64 |
SGT66 |
Compartment |
SGT22/2 |
SGT32/2 |
SGT33/2 |
SGT42/2 |
SGT42/2 |
SGT44/2 |
SGT62/2 |
SGT63/2 |
SGT64/2 |
SGT66/2 |
Compartment |
SGT22/3 |
SGT32/3 |
SGT33/3 |
SGT42/3 |
SGT42/3 |
SGT44/3 |
SGT62/3 |
SGT63/3 |
SGT64/3 |
SGT66/3 |
| |
|
|
|
|
|
|
|
|
|
|
|
|
