Skirting
trunking
|
 
|
| |
| Description |
| |
 
|
Application
Surface distribution of and access to voice, data and power cabling in the same trunking body at skirting level.
The installation of skirting trunking does not require any
modification of the building structure and it can be readily adapted on site to fit any shape of room. It is therefore very suitable for cable installation in refurbishment projects.
Description
A comprehensive range of multi compartment steel trunking with a chamfered or square profile which is manufactured for installation at skirting height. It has been designed for strength, ease of installation and a final appearance that will enhance any commercial environment.
The lid which totally encloses the body is available in a number of different finishes. Where on-site coating is specified, the lid may be supplied in self-colour zintec - a surface that will readily accept any proprietary gloss paint.
For a high quality coloured finish, the lid may be supplied powder coated in a wide choice of colours. Powder coating offers an attractive finish which is also highly resistant to damage during installation and in subsequent use.
The lid may also be manufactured in stainless steel with a
polished or satin finish.
Accessories
In addition to the normal range of accessories, there are also
accessories which link Armorduct Skirting to the Armorduct Dado, Flush Floor and Underscreed systems. |
|
|
| SKIRTING TRUNKING PROFILE |
| |
|
|
| Standard
Specification |
| |
| Material
Finish
|
Body:
Lid:
Body:
Lid:
|
Hot dipped galvanised sheet steel to BS EN10142:1991; Fe PO2G Z275NAC; BS EN10143:1993
20 gauge (1.00mm).
Electro coated steel: BS EN 10152:1994; DC01 ZE25/25AC; BS EN 10130:1991 18 gauge (1.2mm).
Self colour galvanised sheet steel to FePO2G. Z275NAC.
Complies with BS4678 Part 1 1978 - Class 3 Heavy Protection against Corrosion.
Epoxy powder coat in white RAL 9010.
Epoxy powder coat in white RAL 9010.
|
|
| Alternative
Specifications |
| |
Length The body can be manufactured in lengths up to 3 metres.
Finish Lids may be epoxy powder coated in a wide range of colours.
Material Lids can be manufactured in 1.2mm stainless steel to BS1449: Part 2:1983 Type 304,
with mill finish 2A, bright, annealed or mill finish 2B, satin grained 180 to 220 grit size.
|
|
| Ordering
Information |
| |
 |
The information listed is for the standard range of chamfered and square skirting sections. The trunking body is supplied in 2 metre lengths as standard complete with body coupler and fixing screws.
Accessory bodies are supplied with integral couplers and all necessary fixing screws.
Accessory Lids are supplied with two fixing bridges and all necessary 3.5mm screws.
Earth links are not included and should be ordered separately.
Handed Accessories
Some accessories are handed and it is very important to indicate the hand required when ordering.
The convention used by Armorduct is illustrated on the left and can be described as follows: “When looking at the wall on which the accessory is to be mounted,
is the position to the left or right hand of the trunking run”
As a reminder the symbol  is shown against all handed accessories. |
|
|
