|
 |
|
|
|
| |
Ingress Protected
Trunking
|
| |
Description |
| |
A range of single and multi-compartmented returned edge surface cable trunking designed and manufactured to meet the degree of ingress protection
The trunking is supplied in 2 metre lengths as standard, complete with body, lid, coupler and all necessary fixing screws.
The trunking is supplied with a removable plastic coating which protects the material from surface damage during manufacture and distribution |
| |
Standard Specification |
| |
| British Standard |
No standard exists for stainless steel trunking, however, in terms of size and construction the range complies with the general surface cable trunking specifications BS 4678: Part 1: 1978 |
| Material Gauge |
Unless otherwise stated all products shown are manufactured from 1.2mm material. |
| Material Type |
Stainless steel sheet to BS1449: Part 2: 1983. Type 304. 1.4301. |
| Material Finish |
2A Bright Annealed (Mirror Finish)
Mechanically Polished finish 3B Dull buffed (Satin) |
| Sealing |
Full contact gasket compressed by fixing screws |
|
| |
Alternative Specifications |
| Length |
Trunking can be supplied in lengths other than 2 metres. |
| Material Gauge |
Gauges other than 1.2mm can be supplied. |
| Material Type |
Stainless steel sheet to BS1449: Part 2: 1983 Type 316L. 1.4404 |
| Material Finish |
Mill finish 2B (Smooth dull finish). |
|
 |
|
Fully Gasketted Trunking |
|
| |
|
| A range of single and multi-compartmented surface trunking designed and manufactured to meet a high degree of ingress protection
The trunking is constructed with an outward return. The gasket is compressed between the body and lid by screw fixings locating into bushes. Body to body sealing is achieved using a gasketted internal coupler and external cover. The lid to lid joint is also coverd by an external gasketted strap. |
|
| |
|
| |
|
| Ordering Information |
|
| |
|
| The ordering code are those standard surface cable trunking, see page 7-15, with the addition
of the suffix /WP. For example SGT22/WP. |
|
|
 |
|
Fully Gasketted Trunking |
|
| |
|
| A range of single and multi-compartmented surface trunking designed and manufactured to meet a low degree of ingress protection. The trunking is constructed with a standard return edge format, but has the addition of a gasket between the body and the lid and a gasketted internal coupler. The lid is fixed with screws into bushes inserted in the return edge. |
|
| |
|
| |
|
| Ordering Information |
|
| |
|
| The ordering code are those standard surface cable trunking, see page 7-15, with the addition
of the suffix /SP. For example SGT33/SP. |
|
|
|
|
|
|
|
