Flush Floor
Outlet Trunking
|
 
 |
| |
| Description |
| |
|
The Armorduct Flush Floor Service Outlet System has been designed for the distribution of and access to power, voice and data services in screeded floors, particularly where flexibility in the positioning of service outlets is required.
The Flush Floor Service Outlet System consists of three main elements;
- A service compartment trunking together with a
comprehensive range of accessories.
- A Flush Floor Outlet module which lies within the body of the trunking and can be located at any position along the length of the trunking run.
- A wide range of power, voice and data socket plates.
The Trunking and accessories are manufactured in self-coloured pre-galvanised steel.
The trunking is supplied in two metre lengths, with three or four compartments as standard.
Each trunking length has four separately fixed lids each 500mm long which when installed lie level with the surface of the surrounding screed. A comprehensive range of junctions, riser bends and sealing ends are available for use with the trunking.
|
|
|
| Flush Floor Outlet Trunking Profiles |
| |
| Specification
Self colour pre-galvanised steel sheet to:
BS EN10142:1991
Fe P02G Z275NAC
BS EN10143:1993
Body and divider 1.2mm, Lid 2.5mm |
Other sizes of trunking
The standard size renge only is shown. Although the width of the centre compartments must remain, as shown, the width of the outer compartments may be increased to allow for extra data capacity. The height may also be increased to suit specific applications. |
|
|
